Liebert UPS Series 610T 225 KVA 208/208 Voltage 3 phase, Quantity of (2), UPS for redundancy In Operation 2007, 2008, 2009, reconditioned
On-Line (Double Conversion) UPS—
Delivers continuous, high-quality AC power to equipment with no break when transferring to battery. Protects equipment from virtually all power disturbances due to blackouts, brownouts, sags, surges or noise interference.
- 12-pulse, 3-phase rectifier/charger
- Easy-to-read backlit LCD monitor/control panel
- Input and output isolation transformer
- 2-stage battery charge current limit
- 2-stage input AC current limit
- Internal wrap-around bypass
- Automatic and programmable retransfer
- Automatic line-drop compensation
- Battery over discharge protection
- Battery-time-remaining display and battery statistics
- Automatic equalize charge timer
- Emergency Power Off (EPO)
- Front access for service and maintenance
Options and Accessories
- Input filter/power factor correction
- Load Bus Sync™ (for dual load bus systems)
- Power-Tie® Dual-Bus Systems
- Maintenance bypass switchboards
- Power distribution unit
- Standard and custom switchgear packages
- Valve-regulated lead-acid battery packs
- SNMP capabilities
- Remote monitor panel
- Communications interfaces
- Alarm status contacts
- Customer alarm inputs
Liebert UPS 610T, 225 KVA
Battery System Liebert Cabinets
for (2) UPS systems, quantity (2) each
- Input Battery Breaker 450 Amps
- 40 C & D UPS 12-370 batteries each cabinet
- Used Batteries operation 2007, 2008, 2009
- Batteries have been recharged to 12.8 to 13.1 Volts
Liebert Battery Cabinet, Qtn 4
C&C 12-370 batteries
Liebert STS 600 Amp static switch
Static Transfer Switch2, quantity (2) for redundant system, Input 208 Voltage, 3 phase
In addition to the LBS and Power-Tie options, the Liebert Static Transfer Switch 2 (STS2) makes the redundancy truly usable.
The STS2 can be used with a power distribution unit (PDU) or dedicated to a specific piece of load equipment to provide dual power cord functionality.
The STS2 connects to a dual bus power
distribution network and makes a nearly instant (less
than quarter-cycle) transfer of its connected load from
one power source to the other.
Distributed Redundant Configurations
The first arrangement provides a high level of fault tolerance. A Liebert STS2 ahead of the PDU provides uninterrupted transfers between UPS systems.
The fast switching capability of the static switch provides protection against “fast” power system failures, such as source failures, breaker trips and even operator error. The limitation here is that you still can’t service the PDU when the load is on-line.
The second arrangement has a single-input load receiving power from a static switch on the output of two PDUs.
Liebert STS 600 Amp Static Switch
Liebert PDU, 225 KVA 208/208 Volts Power Distribution Centers
(3) 42 Pole panels
Quantity (2) for redundant system
Input 208 Voltage, 3 phase
Liebert’s Precision Power Center (PPC) takes packaged power systems to new heights...literally.
By placing the input and output conduit connections at the top of the unit, the Top-Exit PPC brings the benefits of computer room packaged power systems to non-raised floor applications. In a single cabinet, the PPC combines distribution, computer-grade grounding, isolation, and power monitoring, providing the protection your vital computer equipment demands
Liebert PDU, 225 Amps 208 voltage
Liebert UPS Battery Monitoring(4) Battery cabinets, 160 C & D 12-370’s
Liebert offers the latest in UPS battery monitoring technology with products by Albér — a leader in the field since 1972. Albér technologies by Liebert are designed to indicate potential battery failure, optimize useful battery life, reduce maintenance cost and increase safety.
Like an ultrasound for a battery, this technology lets you “look inside” and assess its true state of health. Liebert battery monitors use a patented Internal DC resistance test method that bypasses the limitations of outdated AC based impedance testing. By tracking internal resistance, the system can predict and report failing conditions prior to complete failure. A life remaining estimate algorithm, which uses discharge parameters and internal resistance readings, assists in predicting remaining battery life.
Liebert Battery Monitoring Systems continuously diagnose all critical battery parameters such as cell voltage, overall string voltage, current and temperature. An alarm sounds for any out-of-tolerance condition. Trend analysis provides the ability to analyze performance and aid in trouble shooting. The Liebert BDS-256XL Battery Monitoring System Is Designed for Large UPS Systems.
The Liebert BDS-256XL battery monitoring system continuously monitors and diagnoses all critical battery parameters for large UPS systems. It can monitor up to 256 cells/modules per string. Tracking and reporting allow a proactive response in replacing a bad battery before it affects others in the string. The modular design easily expands to monitor an unlimited number of strings.
Liebert Battery monitoring modules Included with battery cabinets, for Liebert cabinets (4), monitoring all 160 C&D 12-370 batteries.
Computer Facility Consultants specializes in reconditioned Liebert products, Liebert System III Air conditioning, Liebert Power Distribution and Uninterruptible Power systems.
Computer Facility Consultants has been a leader in the refurbished market for Liebert products and mission-critical datacenters for more than 30 years.
The cost-saving alternative to the new Liebert systems will maximize the IT budget by purchasing reconditioned Liebert equipment that is tested, reconditioned and warranted and made available from the CFC warehouse, shipped with-in the requested time frame by the client. We have an unparalleled reputation from coast to coast with some of the most storied names in IT. We’ve worked hard to earn their trust and their business, as we will work for you and your data center needs.
Call us today with complete engineering support at no cost.
Available Liebert Data Center Equipment
|Liebert air conditioning equipment is essential to a data center for the purpose of keeping the room cool, generally around 65 to 70 degrees Fahrenheit.
||Automatic transfer switches facilitate continuous operation and switching of electrical loads between the primary source and the standby generators of a data center.
||Tate access flooring provides a space for air to circulate below the floor, as part of the air conditioning system, while simultaneously providing space for power cables.
|Liebert - Powerwarer uninterruptable power systems for data center UPS, is a device that maintains a continuous supply of electric power to the data center's essential equipment so that it will not shut down unexpectedly.
||Cutler Hammer and General Electric switchboards are devices that direct electricity from one source to another, with switches that allow allow data center electricity to be redirected.
||Liebert power distribution units, or data center PDUs, are devices that distribute electric power by taking high voltage and amperage and reducing it to more common and useful levels.
Buy Used Liebert Data Center Equipment - CFC provides new surplus and used computer room equipment that is factory new, palletized and ready for installation.
Sell Used Liebert Data Center Equipment - Looking to get rid of old data center equipment? You've come to the right place. CFC offer the best payouts for old and used data center equipment.
Refurbished Liebert Equipment is Good as New - Refurbished and good as new equipment provides cost effective alternatives to high priced brand new data center equipment.
FREE Engineering Support - We are available anytime, before or after the sale, to help in the installation, troubleshooting, or support and service of your data center equipment.
What is a Data Center?
A data center is a technical setup used for housing a large amount of electronic equipment, usually computers and communications equipment, for the purpose of handling the data necessary for any given number of operations.
Many larger companies now have some kind of data center, while several have dozens of data centers.
Data is a crucial aspect of many business and organizational operations, and data centers must therefore contain high levels of security, functionality and self-maintenance. Because of this, the physical and logical layout of a data center is something that often requires expert consultation.
What is Data Center Equipment?
Due to the complexity of the servers, mainframe computers and storage systems that compose a data center, the physical environment of the data center must be kept under strict control. Computer Facility Consultants, Inc. buys and sells the environmental controls needed to keep a data center functioning properly.